Autodesk Products
ออโตเดสก์ (Autodesk) จากวิกิพีเดีย สารานุกรมเสรี ออโตเดสก์ (Autodesk, Inc.; แนสแด็ก: ADSK) เป็นบริษัทซอฟต์แวร์สำหรับงานออกแบบ สาธารณูปโภค อุตสาหกรรม อาคาร สื่อและการบันเทิง ออโตเดสก์ก่อตั้งโดย จอห์น วอล์กเกอร์ และพนักงานอื่นอีก 12 คน โดยก่อตั้งในปี พ.ศ. 2525 ในปัจจุบันมีสำนักงานอยู่ที่ ซานราฟาเอล รัฐแคลิฟอร์เนีย สหรัฐอเมริกา
ออโตแคด (AutoCAD) จากวิกิพีเดีย สารานุกรมเสรี ออโตแคด (AutoCAD) เป็นโปรแกรมช่วยออกแบบด้วยคอมพิวเตอร์ (CAD - Computer Aided Drafting/Design) พัฒนาโดยบริษัทออโตเดสก์ (Autodesk, Inc.) สหรัฐอเมริกา รุ่นล่าสุดของโปรแกรมในปัจจุบัน (พ.ศ. 2551) คือ AutoCAD 2009 ซึ่งทำงานบนระบบปฏิบัติการไมโครซอฟท์ วินโดวส์เท่านั้น ส่วนสำหรับระบบปฏิบัติการอื่นๆนั้นได้หยุดพัฒนาไปแล้ว +[VT]
24 ก.ย. 2555
23 ก.ย. 2555
22 ก.ย. 2555
8 ก.ย. 2555
Enabling 3GB switch ,AutoCAD 3D Services & Support -
Enabling 3GB switch on Windows Vista™, Windows 7 or Windows XP
Issue
You want to make more memory available to your Autodesk application by enable the 3GB switch on your 32 bit version of Windows Vista™, Windows 7 or Windows XP operating systems.
While the 3GB switch may be a useful tool that allows you to access more memory for your Autodesk application, it should be mentioned that not all Windows updates or hardware and graphics drivers work well, or at all, with the 3GB switch enabled. In fact, some limitations may even apply to certain features that ship with your Autodesk application.
If you experience any unexpected or abnormal behavior with the 3GB switch enabled, we recommend that you disable it and move to a 64 bit application.
Note: Inventor users should reference this link from the Inventor WikiHelp regarding the limitations of the 3GB switch.
Solution
To enable the 3GB switch on Windows Vista™ or Windows 7:
- Right-click Command Prompt in the Accessories program group of the Start menu. Click Run as Administrator.
- At the command prompt, enter "bcdedit /set IncreaseUserVa 3072"
- Restart the computer.
To disable the 3GB switch:
- Right-click on Command Prompt in the Accessories program group of the Start menu. Click Run as Administrator.
- At the command prompt, enter "bcdedit /deletevalue IncreaseUserVa"
- Restart the computer.
To enable the 3GB switch on Windows XP:
- Right-click My Computer. Click Properties.
- In the System Properties dialog box, click the Advanced tab.
- On the Advanced tab, under Startup and Recovery, click Settings.
- In the Startup and Recovery dialog box, under System startup, click Edit. The Windows boot.ini file will be opened in Microsoft® Notepad.
- Create a backup copy of the boot.ini file. Note: Boot.ini files may vary from computer to computer.
- Select the following line in the boot.ini file:
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect - Press Ctrl+C to copy the line and then press Ctrl+V to paste it immediately below the original line.
Note: Your text string may be different from the text string in this solution, so be sure to copy the text string from your boot.ini file, and not the text string included here. - Modify the copied line to include “ /3GB”, as shown in the following example:
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional 3GB" /3GB /fastdetect
Note: Do not overwrite any existing lines. - Save and close the boot.ini file.
- Click OK to close each dialog box.
- Restart your computer.
- During startup, select the 3GB option. If you do not select the 3GB option, the system will default to the 2GB total memory setting.
Note: If problems occur during startup, you may try to resolve the issue by updating some of your drivers. However, recall the notice at the beginning of this solutions that note all Windows update or hardware and graphics drivers work with the 3GB switch enabled.
For more information on the 3GB switch, refer to the following Microsoft MSDN article:
การออกแบบชิ้นงานด้วย AutoDesk Inventor (Videos)
Videos
- 3D Sketch Precise Input
- Define Workpiece Dimensions
- Assemble
- Assembly Constraint Alt-drag
- Assembly Design Views
- Assembly Section Views
- Assembly Weld Fillet
- Assembly Weld Fillet Intermittent
- Assembly Weld From To Extents
- Bearing Loads
- Chamfer
- Concentric Hole
- Contact - Part 1
- Contact - Part 2
- Contact - Part 3
- Convergence
- Copy a User Interface Form
- Create a Revolved Feature
- Create a Centerline
- Create Independent Ordinate Dimensions
- Create Control Vertex Splines
- Direct Manipulation
- Draft Analysis
- Drawing Datum Leader
- Rotate a Drawing View with Sketch
- Create a Slice View
- Custom Shaped Weld
- Edit Feature
- Edit Sketch
- Equation Curves
- Extend Sketch Curves Dynamically
- Extrude
- Extrude Taper
- Display Failed Feature
- Fillet Setback
- Hole From Point
- Create a Fillet or a Round
- Create Custom User Interface Forms
- Create a User Interface Form
- Create a Global User Interface Form
- Delete a Form from iLogic Browser
- Add and Edit Controls on iLogic Browser
- Edit a User Interface Form
- Resize Controls on a User Interface Form
- Use a Custom Interface Form
- Use Images on a Form
- Import DWG to Part Sketch
- Import and Repair Environment Basics
- Use Repair Environment Tools
- Import AutoCAD Surfaces to Inventor
- Edit a Lighting Style
- Assembly Creation
- Drawing Creation
- Inventor Interface
- View Navigation
- Inventor Overview
- Part Creation
- Introduction to Sketching
- Introduction to Projects - Part 2
- Introduction to Projects - Part 1
- Edit the Light Latitude and Longitude
- Linear Hole
- Move Face Manipulator
- Move Faces by Direction and Distance
- Move Sketch Geometry to a Different Face
- Offset Sketch Curves
- Use Parametric Dimensions in a Part File
- Use 3D Grips to Resize a Feature
- Use 3D Grips to Edit Feature Offset and Feature Extent
- Use 3D Grips to Edit a Revolved Feature
- Create Fixed Edge Face Draft
- Extend a Surface
- Face Draft Options
- Create Fixed Plane Face Draft
- Create a Parting Line Face Draft
- Create a Smooth (G2) Fillet
- Create a Full Round Fillet
- Preserve All Features Option
- Create a Variable-radius Fillet
- Use a Sketch to Create a Hole
- Part Move Face Point to Point Planar
- Revolve a Sketch Between Two Faces or Planes
- Create a Rib Feature with a Boss and Draft
- Create a Rib Feature Parallel to Sketch Plane
- Create a Rib
- Sweep Along an Edge
- Project Files
- Two Point Center Rectangle
- Three Point Center Rectangle
- Results Evaluation - Part 1
- Results Evaluation - Part 2
- Results Evaluation - Part 3
- Rotate Drawing View
- Scene Assembly studio
- Sheet Metal Bend Edit
- Sheet Metal Bend Zone Edit
- Sheet Metal Corner Edit
- Sheet Metal Face
- Sheet Metal Flange
- Multi-edge Contour Flange
- Sheet Metal Flange Extents
- Sheet Metal Lofted Flange
- Sheet Metal Lofted Flange for Press Brake Output
- Change Arc Direction
- Perpendicular Arc
- Create a Tangent Arc with the Line Command
- Sketch Constraint Inferecing
- Sketch Parallel Lines
- Sketch Perpendicular Lines
- Create a Line Tangent to a Circle or Ellipse
- Prevent Automatic Sketching Constraints
- View Sketch Constraints
- Dimension to a Centerline
- Use Existing Dimensions to Create Dimensions
- End a Line
- Project Assembly Geometry onto a Sketch Plane
- Clear a Selection Point and Create a New Selection Point
- Trim Curves Dynamically
- Soft Springs
- Offset a Ground Plane
- Symmetry
- Entity Types to Import Options
- Import an Assembly as a Single Part
- trans ire off post process
- trans ire on post process
- Translation Report Options
- Translator Save Options
- Import Unit Options
- UCS Geometry
- UCS Sketch
- Use and Edit Drawing Sketch Hatch
- Work Axis Central to a Circular Feature
- Work Plane at an angle to a face or plane
- Work Plane Normal to a Face
- Work Points 3D Sketch
- Work with Dynamic Input
Videos
- 3D Sketch Precise Input
- Define Workpiece Dimensions
- Assemble
- Assembly Constraint Alt-drag
- Assembly Design Views
- Assembly Section Views
- Assembly Weld Fillet
- Assembly Weld Fillet Intermittent
- Assembly Weld From To Extents
- Bearing Loads
- Chamfer
- Concentric Hole
- Contact - Part 1
- Contact - Part 2
- Contact - Part 3
- Convergence
- Copy a User Interface Form
- Create a Revolved Feature
- Create a Centerline
- Create Independent Ordinate Dimensions
- Create Control Vertex Splines
- Direct Manipulation
- Draft Analysis
- Drawing Datum Leader
- Rotate a Drawing View with Sketch
- Create a Slice View
- Custom Shaped Weld
- Edit Feature
- Edit Sketch
- Equation Curves
- Extend Sketch Curves Dynamically
- Extrude
- Extrude Taper
- Display Failed Feature
- Fillet Setback
- Hole From Point
- Create a Fillet or a Round
- Create Custom User Interface Forms
- Create a User Interface Form
- Create a Global User Interface Form
- Delete a Form from iLogic Browser
- Add and Edit Controls on iLogic Browser
- Edit a User Interface Form
- Resize Controls on a User Interface Form
- Use a Custom Interface Form
- Use Images on a Form
- Import DWG to Part Sketch
- Import and Repair Environment Basics
- Use Repair Environment Tools
- Import AutoCAD Surfaces to Inventor
- Edit a Lighting Style
- Assembly Creation
- Drawing Creation
- Inventor Interface
- View Navigation
- Inventor Overview
- Part Creation
- Introduction to Sketching
- Introduction to Projects - Part 2
- Introduction to Projects - Part 1
- Edit the Light Latitude and Longitude
- Linear Hole
- Move Face Manipulator
- Move Faces by Direction and Distance
- Move Sketch Geometry to a Different Face
- Offset Sketch Curves
- Use Parametric Dimensions in a Part File
- Use 3D Grips to Resize a Feature
- Use 3D Grips to Edit Feature Offset and Feature Extent
- Use 3D Grips to Edit a Revolved Feature
- Create Fixed Edge Face Draft
- Extend a Surface
- Face Draft Options
- Create Fixed Plane Face Draft
- Create a Parting Line Face Draft
- Create a Smooth (G2) Fillet
- Create a Full Round Fillet
- Preserve All Features Option
- Create a Variable-radius Fillet
- Use a Sketch to Create a Hole
- Part Move Face Point to Point Planar
- Revolve a Sketch Between Two Faces or Planes
- Create a Rib Feature with a Boss and Draft
- Create a Rib Feature Parallel to Sketch Plane
- Create a Rib
- Sweep Along an Edge
- Project Files
- Two Point Center Rectangle
- Three Point Center Rectangle
- Results Evaluation - Part 1
- Results Evaluation - Part 2
- Results Evaluation - Part 3
- Rotate Drawing View
- Scene Assembly studio
- Sheet Metal Bend Edit
- Sheet Metal Bend Zone Edit
- Sheet Metal Corner Edit
- Sheet Metal Face
- Sheet Metal Flange
- Multi-edge Contour Flange
- Sheet Metal Flange Extents
- Sheet Metal Lofted Flange
- Sheet Metal Lofted Flange for Press Brake Output
- Change Arc Direction
- Perpendicular Arc
- Create a Tangent Arc with the Line Command
- Sketch Constraint Inferecing
- Sketch Parallel Lines
- Sketch Perpendicular Lines
- Create a Line Tangent to a Circle or Ellipse
- Prevent Automatic Sketching Constraints
- View Sketch Constraints
- Dimension to a Centerline
- Use Existing Dimensions to Create Dimensions
- End a Line
- Project Assembly Geometry onto a Sketch Plane
- Clear a Selection Point and Create a New Selection Point
- Trim Curves Dynamically
- Soft Springs
- Offset a Ground Plane
- Symmetry
- Entity Types to Import Options
- Import an Assembly as a Single Part
- trans ire off post process
- trans ire on post process
- Translation Report Options
- Translator Save Options
- Import Unit Options
- UCS Geometry
- UCS Sketch
- Use and Edit Drawing Sketch Hatch
- Work Axis Central to a Circular Feature
- Work Plane at an angle to a face or plane
- Work Plane Normal to a Face
- Work Points 3D Sketch
- Work with Dynamic Input
สมัครสมาชิก:
บทความ (Atom)